INVT Inverter Goodrive GD35-045G-4-C1 Manual

The INVT Goodrive GD35-045G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, built-in protections, user-friendly interface, multiple communication protocols.

Feature	Description
Advanced Control	Optimizes motor performance and efficiency
Built-in Protections	Overvoltage, undervoltage, overcurrent, and thermal protection
User Interface	Intuitive display for easy operation and monitoring
Communication Protocols	Supports Modbus, CANopen, and other protocols
Compact Design	Space-saving design for easy installation

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are secure before powering on.

WARNING! Ensure the inverter is properly grounded to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters in the setup menu.
Configure the communication settings if applicable.
Set the operational parameters such as speed and torque.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380-480V AC.
Output Power: 45 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Dimensions: 400mm x 300mm x 200mm.

Controls and Settings

Access the inverter settings through the user interface. Key controls include:

Display: Shows operational status and parameters.

Buttons: Navigate through menus and adjust settings.

Settings include motor parameters, operational modes, and communication settings.

Connecting Devices

Ensure proper connections to avoid damage to the inverter and connected devices.

Turn off all power before making connections.
Follow the wiring diagram for input and output connections.
Verify all connections before powering on the inverter.

Tip: Use appropriate cables and connectors for reliable performance.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the main switch.
Select the desired operational mode from the menu.
Start the motor by pressing the start button.
Monitor the operational parameters on the display.

WARNING! Do not exceed the rated parameters to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections and wiring periodically.
Clean the inverter housing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Update firmware as necessary for improved performance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply voltage.
No output voltage	Faulty connections	Verify output connections and wiring.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Error codes displayed	Internal fault	Refer to the error code list in the manual.

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.