INVT Inverter Goodrive GD35-045G-4-H1 Manual

The INVT Goodrive GD35-045G-4-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a compact design, and robust protection mechanisms. This manual provides essential information regarding safety, installation, operation, and troubleshooting of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact size, user-friendly interface, and multiple protection functions such as over-voltage, under-voltage, and over-temperature.

Feature	Description
High Efficiency	Ensures optimal performance and energy savings.
Compact Design	Space-saving design for easy installation.
User-Friendly Interface	Intuitive controls for easy operation.
Multiple Protection Functions	Includes over-voltage, under-voltage, and over-temperature protections.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is installed by qualified personnel to avoid electrical hazards.

First-Time Setup

Follow the on-screen prompts to configure the inverter settings:

Select the appropriate operating mode.
Set the output frequency and voltage.
Configure any additional parameters as needed.
Save the settings and restart the inverter.

CAUTION! Double-check all settings before saving to ensure proper operation.

Specifications

Model: GD35-045G-4-H1
Input Voltage: 380V AC
Output Power: 45 kW
Frequency Range: 0-400 Hz
Protection Class: IP20
Operating Temperature: -10°C to 50°C

Controls and Settings

The inverter features a user-friendly control panel with buttons for navigation, parameter setting, and monitoring.

Display: LCD screen showing operational status and settings.

Buttons: Start, Stop, Up, Down, Enter for easy navigation.

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the motor or load to the output terminals.
Connect any control devices as per the wiring diagram.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Start button to initiate operation.
Monitor the display for operational status.
Adjust settings as necessary during operation.
Press Stop to halt operation safely.

WARNING! Always follow safety protocols during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring regularly.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Schedule professional servicing as needed.

CAUTION! Always disconnect power before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	No power supply	Check power connections and ensure supply is on.
Error code displayed	Fault detected	Refer to the manual for error code definitions and solutions.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Output voltage unstable	Load issues	Check load connections and specifications.

Reset: Follow the reset procedure in the manual if necessary.

Service: For further assistance, contact INVT support.