INVT Inverter Goodrive GD35-045G-6-C1 Manual

The INVT Goodrive GD35-045G-6-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, user-friendly interface, multiple protection features, and communication capabilities.

Feature	Description
Advanced Control	Supports vector control and V/F control modes.
User Interface	Intuitive LCD display for easy operation.
Protection Mechanisms	Over-voltage, under-voltage, over-current, and over-temperature protection.
Communication	Supports Modbus RTU for integration with other systems.
Compact Design	Space-saving design for easy installation.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are secure and insulated.
Connect the output to the motor or load.

WARNING! Ensure power is off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and configure the settings as per your application requirements.

Set the motor parameters in the setup menu.
Configure the control mode (V/F or vector control).
Adjust the acceleration and deceleration times.
Save the settings and test the operation.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Model: GD35-045G-6-C1.
Input Voltage: 380V AC.
Output Power: 45 kW.
Control Mode: V/F and vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access the settings via the LCD display. Use the navigation buttons to adjust parameters.

Key Controls: Power, Start/Stop, Up/Down, Enter.

Settings include motor parameters, control mode, and protection settings.

Connecting Devices

Ensure proper connections to avoid damage to the inverter and connected devices.

Turn off the inverter before making connections.
Connect the motor to the output terminals.
Connect the control signals as required.
Power on the inverter and check for proper operation.

Tip: Use shielded cables for control signals to reduce interference.

Operating the Inverter

Follow the steps below to operate the inverter safely and effectively.

Press the power button to turn on the inverter.
Select the desired operating mode.
Start the motor using the Start button.
Monitor the display for any fault indications.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

Check connections and tighten if necessary.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Perform software updates as needed.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Inspect output connections and wiring.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Fault indication on display	Internal fault	Reset the inverter and check for errors.

Reset: Follow the reset procedure in the user manual if necessary.

Service: Contact INVT support for further assistance.