INVT Inverter Goodrive GD35-045G-6-D1 Manual

The INVT Goodrive GD35-045G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a compact design, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, multiple protection functions, user-friendly interface, and compatibility with various motor types.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Compact Design	Space-saving installation with a robust build.
Multiple Protection	Over-voltage, under-voltage, over-current protections.
User-Friendly Interface	Easy-to-navigate control panel and display.
Compatibility	Works with various motor types and applications.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the power supply according to the wiring diagram.
Ensure proper grounding of the inverter.
Connect the motor to the inverter output terminals.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure any additional settings as required.
Save the configuration and exit the setup mode.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Model: GD35-045G-6-D1.
Input Voltage: 380V AC.
Output Power: 45 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

The inverter features a control panel with buttons for operation and settings adjustment.

Display: LCD screen for real-time monitoring.

Buttons: Start, Stop, Up, Down, Enter for navigation.

Connecting Devices

Follow these guidelines to connect external devices:

Ensure the inverter is powered off before connecting.
Use appropriate cables for connections.
Verify all connections are secure before powering on.

Tip: Always refer to the wiring diagram provided in the manual.

Operating the Inverter

To operate the inverter:

Press the Start button to initiate operation.
Monitor the display for operational status.
Adjust settings as necessary during operation.
Press Stop to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with relevant safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply.
No output voltage	Incorrect settings	Verify output settings and parameters.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Fault code displayed	Internal error	Refer to the fault code section in the manual.

Reset: Follow the reset procedure in the settings menu if necessary.

Support: For assistance, contact INVT support at the provided contact information.