INVT Inverter Goodrive GD35-045G-6-H1 Manual

The INVT Goodrive GD35-045G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple protection features, and advanced control algorithms.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
User Interface	Intuitive display for easy operation and monitoring.
Protection Mechanisms	Over-voltage, under-voltage, and over-temperature protection.
Control Algorithms	Advanced algorithms for precise control of motor speed and torque.
Communication Ports	Supports various communication protocols for integration.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely in a well-ventilated area.
Connect the power supply according to the wiring diagram.
Ensure all connections are secure and insulated.
Power on the inverter and check for proper operation.

WARNING! Follow all safety guidelines during installation to prevent injury or damage.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operational limits and safety parameters.
Test the inverter with a no-load condition before full operation.

CAUTION! Ensure all settings are correct to avoid equipment damage.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 45 kW.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and parameters.

Buttons: Navigate through menus and settings.

Indicators: LED indicators for power, fault, and operational status.

Connecting Devices

Ensure proper connections to external devices for optimal performance.

Turn off the inverter before making connections.
Connect the motor and power supply according to the wiring diagram.
Verify all connections are secure before powering on.

Tip: Double-check wiring to prevent short circuits.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operational mode.
Start the motor and monitor performance.
Adjust settings as necessary for optimal operation.

WARNING! Do not operate the inverter beyond its rated capacity.

Maintenance

Regular maintenance is essential for longevity.

Inspect connections and wiring regularly.
Clean the inverter housing to prevent dust buildup.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Fault indicator on	Internal fault	Reset the inverter and check for errors.
Motor not running	Incorrect settings	Verify motor parameters and settings.

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.