INVT Inverter Goodrive GD35-055G-4-S1 Manual

The INVT Goodrive GD35-055G-4-S1 is a high-performance inverter designed for various industrial applications. It offers advanced control features, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, built-in protection features, user-friendly interface, and compact design.

Feature	Description
Advanced Control	Supports vector control and V/F control modes for various applications.
Built-in Protection	Over-voltage, under-voltage, over-current, and over-temperature protection.
User Interface	Easy-to-use keypad and LCD display for monitoring and adjustments.
Compact Design	Space-saving design suitable for various installation environments.
Communication Ports	RS485 and CAN bus for integration with other devices.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter in a well-ventilated area.
Connect input power supply according to specifications.
Connect output to the motor or load.
Ensure all connections are secure and insulated.

WARNING! Follow electrical safety standards to prevent hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operational mode (V/F or vector control).
Adjust parameters for acceleration and deceleration.
Save settings and perform a test run.

CAUTION! Ensure all settings are correct before operating.

Specifications

Model: GD35-055G-4-S1.
Input Voltage: 380-480V AC.
Output Power: 55 kW.
Control Method: V/F control and vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the user interface. Key controls include:

Keypad: Start, Stop, Forward, Reverse, and Parameter settings.

Display: Shows operational status, error codes, and parameter values.

Connecting Devices

Ensure proper connections to avoid damage.

Turn off power before making connections.
Connect the motor to the inverter output terminals.
Connect the control panel if applicable.
Double-check all connections before powering on.

Tip: Use appropriate gauge wiring for your application.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operational mode.
Start the motor using the keypad.
Monitor performance and make adjustments as necessary.

WARNING! Do not operate without proper training.

Accessibility Features

The inverter includes features for ease of use, including a clear display and intuitive controls.

Care & Cleaning

Keep the inverter clean and free from dust. Unplug before cleaning.

CAUTION! Avoid using liquids; use a dry cloth only.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Error code displayed	Fault condition	Refer to the manual for error code definitions.
Motor not running	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact customer support for further assistance.