INVT Inverter Goodrive GD35-055G-6-H1 Manual

The INVT Goodrive GD35-055G-6-H1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: User-friendly interface, advanced control algorithms, multiple protection features, and compact design.

Feature	Description
Advanced Control	Supports V/f control, vector control, and torque control.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
Communication	Supports RS485 communication for remote monitoring.
Compact Design	Space-saving design suitable for various installations.
User Interface	Intuitive keypad and display for easy operation.

Installation

Ensure proper installation to guarantee optimal performance.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Attach the output connections to the motor.
Ensure all connections are tight and secure.

WARNING! Ensure proper ventilation to avoid overheating. Follow local electrical codes.

First-Time Setup

Power on the inverter and follow the setup instructions on the display.

Select the motor type in the setup menu.
Set the operational parameters such as frequency and voltage.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before starting the motor.

Specifications

Model: GD35-055G-6-H1
Input Voltage: 3-phase 380V-480V AC
Output Power: 55 kW
Control Mode: V/f control, vector control
Protection Level: IP20
Operating Temperature: -10°C to 50°C

Controls and Settings

Access settings via the user interface. Key controls include:

Keypad: Start, Stop, Forward, Reverse, and Parameter settings.

Display: Shows operational status, error codes, and parameter values.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor leads to the inverter output terminals.
Connect the power supply to the inverter input terminals.
Double-check all connections before powering on.

Tip: Use appropriate cable sizes for the connections.

Operating the Inverter

To operate the inverter:

Press the Start button to initiate operation.
Monitor the display for operational status and any error messages.
Use the Stop button to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Accessibility Features

The inverter includes features for ease of use, such as a clear display and intuitive controls.

Care & Cleaning

Keep the inverter clean and free from dust. Use a dry cloth for cleaning.

CAUTION! Do not use liquids or aerosols for cleaning.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply voltage.
Error code displayed	Fault condition	Refer to the manual for error code definitions.
Motor not running	Incorrect wiring	Verify motor connections and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact customer support for further assistance.