INVT Inverter Goodrive GD35-075G-4-C1 Manual

The INVT Goodrive GD35-075G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and a compact design, making it suitable for driving three-phase AC motors. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, advanced control algorithms, built-in protection features, user-friendly interface, and high efficiency.

Feature	Description
Compact Design	Space-saving design for easy installation.
Advanced Control	Supports various control modes including V/F, vector control.
Built-in Protection	Over-voltage, under-voltage, over-current protection.
User Interface	Intuitive keypad and display for easy operation.
High Efficiency	Optimized for energy savings and reduced operational costs.

Installation

Ensure proper installation to avoid damage. Follow the guidelines below:

Mount the inverter securely on a stable surface.
Ensure adequate ventilation around the inverter.
Connect power supply and motor according to the wiring diagram.
Check all connections before powering on.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup instructions on the display.

Select the motor parameters: Set motor type, power rating, and other relevant settings.
Configure control mode: Choose between V/F control or vector control based on application.
Test run: Perform a test run to ensure proper operation.

CAUTION! Double-check all settings before starting the motor.

Specifications

Model: GD35-075G-4-C1
Input Voltage: 380V AC
Output Power: 75 kW
Control Method: V/F and vector control
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

Access settings via the user interface. Key controls include:

Keypad: Start, Stop, Forward, Reverse, and Parameter settings.

Display: Shows operational status, fault codes, and parameter settings.

Connecting Devices

Follow these steps to connect devices:

Turn off the inverter before making connections.
Connect the motor to the output terminals.
Connect the power supply to the input terminals.
Ensure all connections are secure before powering on.

Tip: Use appropriate cables and connectors for safety and efficiency.

Operating the Inverter

To operate the inverter:

Press the Start button to initiate operation.
Monitor the display for operational status and any fault codes.
Adjust speed and torque settings as needed.
Press Stop to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance:

Check for dust and debris; clean the inverter regularly.
Inspect connections for wear and tear.
Ensure proper ventilation to prevent overheating.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply voltage.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	Internal error	Refer to the manual for fault code definitions and solutions.
Motor not running	Incorrect wiring	Verify wiring connections and motor parameters.

Reset: Follow the reset procedure in the manual if necessary.