INVT Inverter Goodrive GD35-075G-4-D1 Manual

The INVT Goodrive GD35-075G-4-D1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, built-in safety features, user-friendly interface, and multiple communication protocols.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
Safety Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
User Interface	Intuitive keypad with LCD display for easy operation.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor ensuring correct phase alignment.
Ground the inverter properly to avoid electrical hazards.

WARNING! Ensure all connections are secure and follow local electrical codes.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the desired operating frequency and voltage.
Configure safety settings and limits.
Save the configuration and test the motor operation.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Model: GD35-075G-4-D1
Input Voltage: 380V-480V AC
Output Power: 75 kW
Control Mode: V/F control, vector control
Operating Temperature: -10°C to 50°C
Protection Class: IP20
Dimensions: 400mm x 200mm x 150mm

Controls and Settings

Access settings via the LCD display and keypad. Key functions include:

Start/Stop: Control motor operation.

Speed Control: Adjust motor speed using the keypad.

Parameter Settings: Modify inverter parameters through the menu.

Connecting Devices

Ensure proper connections for optimal performance:

Turn off power before making connections.
Connect the motor to the inverter output terminals.
Connect the control panel if applicable.
Verify all connections before powering on.

Tip: Double-check wiring to prevent damage to the inverter or motor.

Operating the Inverter

To operate the inverter:

Press the START button to begin operation.
Use the keypad to adjust speed and monitor performance.
Stop the inverter using the STOP button when necessary.
Monitor the display for any fault indications.

WARNING! Do not operate the inverter without proper setup and configuration.

Accessibility Features

The inverter includes features for ease of use, including:

Clear LCD display for visibility, tactile buttons for operation, and customizable settings for user preferences.

Care & Maintenance

Regular maintenance is essential for longevity:

Keep the inverter clean and free of dust. Check connections periodically and ensure proper ventilation.

CAUTION! Unplug the inverter before performing maintenance.

Regulatory Information

This inverter complies with relevant safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply voltage.
Over-temperature alarm	Poor ventilation	Ensure adequate airflow around the inverter.
Motor not running	Incorrect wiring	Verify motor connections and phase alignment.
Fault code displayed	Internal error	Refer to the manual for fault code definitions.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.