INVT Inverter Goodrive GD35-075G-6-D1 Manual

The INVT Goodrive GD35-075G-6-D1 is a high-performance inverter designed for various applications, providing reliable and efficient control of AC motors. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: advanced vector control, built-in PID control, multiple communication protocols, and a user-friendly interface.

Feature	Description
Advanced Vector Control	Provides precise speed and torque control for various applications.
Built-in PID Control	Allows for easy temperature and pressure control in processes.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.
User-Friendly Interface	Intuitive display and keypad for easy operation and configuration.
Compact Design	Space-saving design suitable for various installation environments.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely in a well-ventilated area.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the motor to the inverter output terminals.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the desired operating frequency and acceleration/deceleration times.
Save the configuration and test the motor operation.

CAUTION! Verify all settings before starting the motor to prevent damage.

Specifications

Model: GD35-075G-6-D1
Input Voltage: 3-phase 380V-480V AC
Output Power: 75 kW
Control Method: Vector control
Operating Temperature: -10°C to 50°C
Protection Level: IP20

Controls and Settings

Access settings through the user interface. Key controls include:

Display: Shows operational status and parameters.

Keypad: For navigating menus and adjusting settings.

Common settings include motor parameters, frequency settings, and control modes.

Connecting Devices

Follow these guidelines for connecting external devices:

Ensure the inverter is powered off before making connections.
Connect the control panel and any sensors as per the wiring diagram.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for signal connections to reduce interference.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the main switch.
Select the desired operating mode (e.g., manual or automatic).
Start the motor using the start command.
Monitor the operational parameters on the display.

WARNING! Do not exceed the rated parameters to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust buildup.
Check for any signs of overheating or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Motor does not start	Incorrect settings	Verify motor parameters and settings.
Overheating	Insufficient ventilation	Ensure adequate airflow around the inverter.
Faulty display	Connection issue	Check display connections and replace if necessary.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.