INVT Inverter Goodrive GD35-075G-6-H1 Manual

The INVT Goodrive GD35-075G-6-H1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple protection features, and communication options.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
User Interface	Intuitive keypad with LCD display for easy operation.
Protection Features	Overvoltage, undervoltage, overload, and overheat protection.
Communication Options	Supports Modbus, CANopen, and other protocols.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor ensuring correct polarity.
Ensure proper grounding of the inverter.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and voltage.
Configure communication settings if applicable.
Save the settings and exit the setup menu.

CAUTION! Ensure all parameters are correctly set to avoid motor damage.

Specifications

Model: GD35-075G-6-H1.
Input Voltage: 380V AC.
Output Power: 75 kW.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Control Method: V/F control, vector control.

Controls and Settings

Access settings via the keypad. Key controls include:

Keypad: Start, Stop, Speed Control, Parameter Settings.

Settings: Adjust parameters for motor control, including acceleration and deceleration times.

Connecting Devices

Ensure proper connections to the motor and power supply.

Turn off power before making connections.
Match the wiring according to the inverter's manual.
Verify all connections are tight and secure.

Tip: Double-check wiring before powering on the inverter.

Operating the Inverter

Follow these steps to operate the inverter:

Press the Start button to power on the inverter.
Adjust the speed using the speed control.
Monitor the display for operational status and alerts.
Press Stop to halt operation safely.

WARNING! Always follow safety protocols during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections and wiring periodically.
Clean the inverter casing to prevent dust buildup.
Inspect cooling fans for proper operation.
Update firmware as necessary.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	No power supply	Check power connections and supply.
Overheating	Blocked ventilation	Ensure proper airflow around the inverter.
No output to motor	Incorrect wiring	Verify wiring connections to the motor.
Error codes displayed	Fault condition	Refer to the manual for error code definitions.

Reset: Follow the manual instructions to reset the inverter if necessary.