INVT Inverter Goodrive GD35-090G-4-C1 Manual

The INVT Goodrive GD35-090G-4-C1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, multiple communication protocols, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-performance inverter, user-friendly interface, multiple communication protocols, advanced control algorithms.

Feature	Description
Advanced Control Algorithms	Ensures precise motor control and efficiency.
User-Friendly Interface	Easy navigation and configuration for users.
Multiple Communication Protocols	Supports various industrial communication standards.
Compact Design	Space-saving design suitable for various installations.
Overload Protection	Protects the inverter and connected equipment from damage.

Installation

Unpack and inspect the inverter. Mount it securely in a well-ventilated area.

Connect power supply: Ensure correct voltage and phase.
Connect motor: Use appropriate cables for motor connections.
Ground the inverter: Ensure proper grounding for safety.
Power on the inverter: Check for any error indicators.

WARNING! Ensure all connections are secure to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select motor type: Choose the appropriate motor settings.
Set parameters: Adjust parameters according to application needs.
Test run: Perform a test run to ensure proper operation.

CAUTION! Ensure the area is clear before testing the inverter.

Specifications

Model: GD35-090G-4-C1.
Input Voltage: 380V AC.
Output Power: 90 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the front panel or remote interface. Key controls include:

Front Panel: Power, Start/Stop, Parameter settings, Display.

Remote: Start/Stop, Speed control, Parameter adjustments.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the power supply to the inverter input terminals.
Ensure proper grounding is established.

Tip: Double-check all connections before powering on.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter.
Select the desired operating mode.
Adjust speed and torque settings as needed.
Monitor performance via the display.

WARNING! Do not exceed the rated specifications during operation.

Accessibility Features

The inverter includes features for easy access and operation, including a clear display and intuitive controls.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior.

CAUTION! Avoid using liquids or aerosols near the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
No output to motor	Connection issue	Verify motor connections and settings.
Error code displayed	Fault condition	Refer to the manual for error code definitions.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact INVT support for assistance.