INVT Inverter Goodrive GD35-090G-4-D1 Manual

The INVT Goodrive GD35-090G-4-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a compact design, and robust protection mechanisms. This manual provides essential information regarding safety, installation, operation, and troubleshooting of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and comprehensive protection functions.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols.
Protection Functions	Over-voltage, under-voltage, over-current, and thermal protection.
Easy Setup	User-friendly interface for quick configuration.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect power supply according to specifications.
Ensure proper grounding for safety.
Connect output to the motor or load.

WARNING! Ensure all power is off before making connections.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the control mode (V/F, vector control, etc.).
Configure communication settings if necessary.
Save settings and perform a test run.

CAUTION! Double-check all settings before starting the motor.

Specifications

Input Voltage: 380V AC ± 15%.
Output Voltage: 0-380V AC.
Power Rating: 90 kW.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the control panel. Key controls include:

Display: Shows operational status and parameters.

Buttons: Start, Stop, and Parameter settings.

Adjust parameters for speed, torque, and acceleration as needed.

Connecting Devices

Follow these steps to connect external devices:

Turn off the inverter and external devices before connecting.
Use appropriate cables for connections.
Ensure all connections are secure before powering on.

Tip: Refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter:

Press the Start button to begin operation.
Monitor the display for operational status.
Adjust speed and torque as necessary during operation.
Press Stop to halt operation safely.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for longevity:

Check connections and wiring periodically.
Clean the inverter casing to prevent dust buildup.
Inspect cooling fans for proper operation.
Perform software updates as recommended.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output voltage	Faulty connections	Inspect output connections for security.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	Internal fault	Refer to the error code list in the manual.

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.