INVT Inverter Goodrive GD35-090G-4-H1 Manual

The INVT Goodrive GD35-090G-4-H1 is a high-performance inverter designed for various applications including industrial automation, HVAC systems, and renewable energy systems. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
User Interface	Intuitive display for easy operation and monitoring.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the output to the motor or load.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the operational modes according to your application.
Adjust the frequency and voltage settings as needed.
Save the settings and perform a test run.

CAUTION! Ensure all settings are correct before starting the inverter.

Specifications

Model: GD35-090G-4-H1.
Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 90 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access settings through the user interface or via external control devices.

Control Panel: Start/Stop, Speed Control, Fault Reset, and Parameter Settings.

Settings include: Motor parameters, operational modes, and communication settings.

Connecting Devices

Ensure proper connections to maximize performance.

Turn off the inverter and all connected devices before making connections.
Follow the wiring diagram for input and output connections.
Verify all connections are secure before powering on.

Tip: Use appropriate gauge wiring to prevent overheating.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the control panel.
Select the desired operational mode.
Adjust the speed and frequency settings as required.
Monitor the performance through the display.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing and ensure ventilation is unobstructed.
Check for software updates and apply as necessary.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output voltage	Faulty connections	Inspect output connections and wiring.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	Internal fault	Refer to the manual for error code definitions.

Reset: Use the reset function in the menu if available.

Support: Contact INVT support for further assistance.