INVT Inverter Goodrive GD35-090G-4-S1 Manual

The INVT Goodrive GD35-090G-4-S1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
User Interface	Intuitive display for easy operation and monitoring.
Multiple Protocols	Supports Modbus, CANopen for flexible integration.
Protection Features	Over-voltage, under-voltage, and over-temperature protection.
Compact Design	Space-saving design for easy installation.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the output to the motor or load.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type in the setup menu.
Set the operating parameters such as frequency and voltage.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before operating the inverter.

Specifications

Model: GD35-090G-4-S1.
Input Voltage: 380V AC.
Output Power: 90 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the settings via the user interface. Key controls include:

Display: Shows operational status and settings.

Buttons: Navigate through menus and adjust settings.

Adjust parameters such as acceleration, deceleration, and frequency limits.

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the control signals to the appropriate terminals.
Verify all connections are correct before powering on.

Tip: Use shielded cables for signal connections to reduce interference.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the main switch.
Select the desired operating mode.
Start the motor by pressing the start button.
Monitor the display for operational status.

WARNING! Do not operate the inverter without proper load connected.

Accessibility Features

The inverter includes features for ease of use, including a clear display and intuitive controls.

Care & Cleaning

Keep the inverter clean and free of dust. Use a dry cloth for cleaning.

CAUTION! Do not use liquids or aerosols for cleaning.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output voltage	Faulty connections	Verify output connections are secure.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	Internal error	Refer to the manual for fault code definitions.

Reset: Follow the reset procedure in the user interface if necessary.

Service: For assistance, contact INVT support.