INVT Inverter Goodrive GD35-090G-6-C1 Manual

The INVT Goodrive GD35-090G-6-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
User Interface	Intuitive display for easy operation and monitoring.
Communication Protocols	Supports Modbus, CANopen, and other protocols.
Protection Features	Over-voltage, under-voltage, and over-temperature protection.
Compact Design	Space-saving design for easy installation.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter on a stable surface, ensuring proper ventilation.
Connect the input power supply according to the wiring diagram.
Attach the output connections to the motor or load.
Ensure all connections are secure and insulated.

WARNING! Ensure power is off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the operational limits for voltage and current.
Configure communication settings if applicable.
Save the settings and perform a test run.

CAUTION! Double-check all settings before running the inverter.

Specifications

Input Voltage: 380V AC.
Output Power: 90 kW.
Control Method: V/f control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Dimensions: 400mm x 300mm x 200mm.

Controls and Settings

Access the settings via the front panel display. Key controls include:

Buttons: Power, Menu, Up/Down, Enter.

Settings include motor parameters, operational limits, and communication settings.

Connecting Devices

Ensure proper connections for optimal performance.

Turn off the inverter and all connected devices before making connections.
Match cables to the correct terminals as per the wiring diagram.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter using the front panel button.
Select the desired operational mode (e.g., manual, automatic).
Monitor the display for operational status and parameters.
Adjust settings as necessary during operation.

WARNING! Do not exceed the operational limits set in the configuration.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring regularly.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Perform software updates as needed.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections.
Error code displayed	Configuration error	Refer to the error code list in the manual.
Overheating	Poor ventilation	Ensure proper airflow around the inverter.
Motor not running	Incorrect settings	Verify motor parameters and settings.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.