INVT Inverter Goodrive GD35-090G-6-H1 Manual

The INVT Goodrive GD35-090G-6-H1 is a high-performance inverter designed for various applications, providing reliable power conversion and control. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, User-friendly interface, Multiple protection features, Compact design, High efficiency.

Feature	Description
Advanced Control	Utilizes vector control for precise motor control
User Interface	Intuitive LCD display for easy operation
Protection Features	Over-voltage, under-voltage, over-current protection
Compact Design	Space-saving design for easy installation
High Efficiency	Optimized for energy savings and performance

Installation

Unpack and inspect the inverter. Ensure proper ventilation and a stable mounting surface.

Mount the inverter securely on a wall or surface.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are tight and secure.

WARNING! Ensure proper electrical safety measures are followed during installation.

First-Time Setup

Power on the inverter; follow the setup wizard on the display.

Select the motor type and parameters using the menu.
Set the operational parameters such as frequency and voltage.
Test the inverter with a no-load condition.

CAUTION! Ensure all settings are correct before connecting to the load.

Specifications

Model: GD35-090G-6-H1
Input Voltage: 380V AC
Output Voltage: 0-380V AC
Power Rating: 90 kW
Control Mode: Vector control
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

Access settings via the LCD display. Use the keypad for navigation and adjustments.

Key Controls: POWER, UP/DOWN, ENTER, ESC.

Settings include: Motor parameters, operational limits, fault settings, and communication settings.

Connecting Devices

Connect the inverter to the motor and power supply as per the wiring diagram.

Turn off all power before making connections.
Ensure correct polarity and connection type.
Verify connections before powering on the inverter.

Tip: Use appropriate gauge wiring for the current rating.

Operating the Inverter

Follow the operational guidelines for safe and efficient use.

Power on the inverter and check the display for status.
Start the motor using the control panel.
Monitor the performance and adjust settings as necessary.

WARNING! Do not exceed the rated parameters during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing and ensure ventilation is unobstructed.
Check for firmware updates and apply as necessary.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	Internal error	Refer to the manual for fault code definitions.
Motor not starting	Incorrect settings	Verify motor parameters and settings.

Reset: Follow the reset procedure in the menu if necessary.

Service: Contact customer support for further assistance.