INVT Inverter Goodrive GD35-110G-4-C1 Manual

The INVT Goodrive GD35-110G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust design, and a user-friendly interface. This manual provides essential information on safety, installation, operation, and troubleshooting of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and customizable parameters for various applications.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Protocols	Supports Modbus, CANopen, and other communication protocols.
Customizable Parameters	Allows users to adjust settings for specific applications.
Built-in Protection	Over-voltage, under-voltage, and over-current protection features.

Installation

Ensure proper installation for optimal performance. Follow the steps below:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding of the inverter.
Connect the output to the motor or load.

WARNING! Ensure all power is disconnected before installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure basic settings.

Select the motor type and parameters.
Set the operational mode (e.g., V/F control, vector control).
Adjust the acceleration and deceleration times.
Save the configuration and test the operation.

CAUTION! Double-check all connections before powering on the inverter.

Specifications

Input Voltage: 380V-480V AC.
Output Power: 110 kW.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 45 kg.

Controls and Settings

The inverter features a user-friendly interface with an LCD display for easy navigation.

Control Panel: Start/Stop, Parameter settings, Fault display, and Monitoring.

Access advanced settings through the menu for fine-tuning performance.

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the control signals to the appropriate terminals.
Verify the connections before powering on the inverter.

Tip: Use shielded cables for signal connections to minimize interference.

Operating the Inverter

To operate the inverter, follow the instructions below:

Press the Start button to initiate operation.
Monitor the display for operational status and parameters.
Use the Stop button to halt operation safely.
Adjust speed and torque settings as needed.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output voltage	Faulty connections	Inspect output connections and wiring.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	Internal error	Refer to the fault code section in the manual.

Reset: Follow the reset procedure in the menu if necessary.

Service: Contact INVT support for further assistance.