INVT Inverter Goodrive GD35-110G-4-D1 Manual

The INVT Goodrive GD35-110G-4-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, user-friendly interface, multiple communication protocols, and robust protection features.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
Communication	Supports Modbus, CANopen, and other protocols.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
User Interface	LCD display for easy monitoring and configuration.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation to achieve optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding of the inverter.
Connect the output to the motor or load.

WARNING! Ensure all power is disconnected before installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operational mode (V/F, vector, etc.).
Configure communication settings if applicable.
Save settings and perform a test run.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Input Voltage: 380V AC.
Output Power: 110 kW.
Control Method: V/F control, vector control.
Frequency Range: 0-400 Hz.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the LCD display. Key controls include:

Buttons: Start, Stop, Forward, Reverse, and Parameter settings.

Display: Shows operational status, fault codes, and parameter settings.

Connecting Devices

Ensure proper connections to avoid damage:

Turn off the inverter and devices before connecting.
Match cables to the correct terminals.
Check polarity and secure connections.

Tip: Use appropriate gauge wires for power connections.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operational mode.
Start the motor using the Start button.
Monitor performance via the LCD display.

WARNING! Do not operate without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections and tighten if necessary.
Clean the inverter to prevent dust accumulation.
Inspect for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
Overload alarm	Excessive load	Reduce load and reset the inverter.
Fault code displayed	Internal error	Refer to the manual for fault code definitions.
Motor not running	Incorrect settings	Check motor parameters and settings.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.