INVT Inverter Goodrive GD35-110G-4-H1 Manual

The INVT Goodrive GD35-110G-4-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust design, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, multiple control modes, built-in protection functions, and a compact design suitable for various applications.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Multiple Control Modes	Supports V/F control, vector control, and torque control.
Built-in Protection	Over-voltage, under-voltage, over-current, and over-temperature protection.
Compact Design	Space-saving design for easy installation.
User-Friendly Interface	Intuitive display and control panel for easy operation.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely in a well-ventilated area.
Connect input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the output to the motor or load.

WARNING! Follow all safety guidelines to prevent electrical hazards.

First-Time Setup

Power on the inverter and configure the settings as per your application needs.

Set the motor parameters in the inverter menu.
Configure the control mode based on your application.
Test the operation with no load before connecting to the actual load.

CAUTION! Ensure all settings are correct to avoid damage to the inverter or connected equipment.

Specifications

Input Voltage: 380V-480V AC.
Output Power: 110 kW.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 50 kg.

Controls and Settings

Access the control panel for configuration and monitoring.

Display: LCD display for real-time monitoring.

Buttons: Start, Stop, and Parameter settings.

Adjust settings for speed, torque, and other operational parameters.

Connecting Devices

Follow proper wiring procedures to connect devices safely.

Ensure the inverter is powered off before making connections.
Connect the motor to the inverter output terminals.
Connect the control signals if applicable.

Tip: Double-check all connections before powering on the inverter.

Operating the Inverter

Learn how to operate the inverter effectively.

Press the Start button to initiate operation.
Monitor the display for operational status and parameters.
Adjust speed and torque as needed during operation.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with relevant safety and performance standards.

For support, visit the INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply issue	Check input power connections.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Erratic operation	Incorrect settings	Review and adjust parameters as needed.
Motor not running	Connection issue	Check motor connections and settings.

Reset: Use the reset function in the menu if available.

Service: Contact INVT customer support for further assistance.