INVT Inverter Goodrive GD35-110G-6-D1 Manual

The INVT Goodrive GD35-110G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high reliability, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: advanced vector control, built-in PID control, multiple communication protocols, and customizable parameters for various applications.

Feature	Description
Advanced Control	Supports vector control for precise motor control.
Built-in PID Control	Allows for easy temperature and pressure control.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols.
Customizable Parameters	Users can adjust settings for specific applications.
Compact Design	Space-saving design for easy installation.
High Efficiency	Optimized for energy savings and reduced operational costs.

Installation

Ensure the inverter is installed in a clean, dry environment. Follow these steps for proper installation:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are tight and secure.

WARNING! Ensure power is off before making any connections to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure basic settings.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure communication settings if applicable.
Save the settings and restart the inverter.

CAUTION! Double-check all settings to ensure proper operation.

Specifications

Input Voltage: 380V - 480V AC.
Output Power: 110 kW.
Control Method: Vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Weight: 25 kg.

Controls and Settings

The inverter features a user-friendly interface with an LCD display for easy navigation.

Control Panel: Start/Stop, Speed Control, Parameter Settings, and Fault Display.

Access advanced settings through the menu for fine-tuning performance.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the control panel to the designated port.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for communication connections to reduce interference.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Start button to power on the inverter.
Adjust the speed using the control panel.
Monitor the display for any fault indications.
Press Stop to turn off the inverter safely.

WARNING! Do not operate the inverter outside of specified limits to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided with the inverter.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output voltage	Faulty wiring	Inspect output connections for damage.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault indication on display	Internal error	Refer to the manual for specific fault codes.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.