INVT Inverter Goodrive GD35-110G-6-H1 Manual

The INVT Goodrive GD35-110G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple protection features, and advanced control algorithms.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Robust Protection	Over-voltage, under-voltage, and over-current protection.
User Interface	Intuitive display for easy operation and monitoring.
Multiple Control Modes	Supports V/F control, vector control, and torque control.
Communication Protocols	Supports Modbus, CANopen, and other protocols.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter in a well-ventilated area.
Connect the power supply according to the wiring diagram.
Ensure all connections are secure and insulated.
Connect the motor and other peripherals as needed.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup instructions displayed on the screen.

Select the appropriate motor parameters in the setup menu.
Configure the control mode based on your application.
Set the communication parameters if using external control.
Save the settings and perform a test run.

CAUTION! Double-check all settings before starting the inverter to prevent damage.

Specifications

Input Voltage: 380V AC ± 15%.
Output Power: 110 kW.
Control Mode: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Dimensions: 400mm x 300mm x 200mm.

Controls and Settings

The inverter features a digital display for monitoring and control. Key controls include:

Display: Shows operational status, fault codes, and parameter settings.

Buttons: Start, stop, and parameter adjustment buttons for easy operation.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor leads to the inverter output terminals.
Connect any control devices to the appropriate input terminals.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram provided in the manual.

Operating the Inverter

To operate the inverter, follow these steps:

Press the start button to initiate operation.
Monitor the display for operational status and any fault indications.
Adjust parameters as necessary during operation.
Press the stop button to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Perform firmware updates as recommended by the manufacturer.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the manufacturer's documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	Internal error	Refer to the fault code list in the manual.
Motor not running	Incorrect wiring	Verify motor connections and settings.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.