INVT Inverter Goodrive GD35-132G-4-H1 Manual

The INVT Goodrive GD35-132G-4-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Reduces energy consumption and operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports MODBUS, CANopen, and other protocols for easy integration.
Comprehensive Protection	Over-voltage, under-voltage, over-current, and thermal protection mechanisms.
User-Friendly Interface	Intuitive display and controls for easy operation.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding of the inverter.
Connect the output to the motor or load.

WARNING! Ensure all power is disconnected before installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operational mode (e.g., V/F control, vector control).
Configure communication settings if applicable.
Save the settings and test the operation.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380V-480V AC.
Output Voltage: 0-480V AC.
Power Range: Up to 132 kW.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the inverter settings via the front panel display. Key controls include:

Display: Shows operational status and parameters.

Buttons: Navigate through menus and settings.

Adjust parameters such as frequency, acceleration, and deceleration times.

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the control signals and feedback devices as per the wiring diagram.
Verify all connections are secure and correct.

Tip: Use shielded cables for signal connections to reduce interference.

Operating the Inverter

To operate the inverter:

Power on the inverter using the main switch.
Select the desired operational mode.
Start the motor using the start command.
Monitor the operational parameters on the display.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is crucial for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of overheating or damage.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Motor does not run	Incorrect settings	Verify motor parameters and settings.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.