INVT Inverter Goodrive GD35-132G-4-S1 Manual

The INVT Goodrive GD35-132G-4-S1 is a high-performance inverter designed for various industrial applications. It offers advanced control features, high efficiency, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple control modes, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Control Modes	Supports V/F control, vector control, and more.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
Communication Interfaces	Supports RS485, Modbus, and other protocols.

Installation

Carefully unpack the inverter and inspect for any damage. Ensure proper ventilation and a stable mounting surface.

Mount the inverter securely on a wall or panel.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the motor to the inverter output terminals.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operational frequency range.
Configure control mode based on application needs.
Save settings and perform a test run.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Model: GD35-132G-4-S1
Input Voltage: 380V AC
Output Power: 132 kW
Control Mode: V/F control, vector control
Protection Class: IP20
Operating Temperature: -10°C to 50°C

Controls and Settings

The inverter features a user-friendly interface with an LCD display for easy navigation.

Control Panel: Start/Stop, Speed Control, Parameter Settings.

Access advanced settings through the menu for detailed configuration options.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the control panel and any additional sensors.
Verify all connections are correct before powering on.

Tip: Use shielded cables for signal connections to minimize interference.

Operating the Inverter

Follow the operational guidelines for safe and efficient use of the inverter.

Start the inverter using the control panel.
Monitor the display for operational status and alarms.
Adjust speed and parameters as needed during operation.
Stop the inverter safely using the control panel.

WARNING! Always follow safety protocols during operation.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Erratic operation	Incorrect settings	Review and adjust operational parameters.
Motor not responding	Connection issue	Check motor connections and wiring.

Reset: Refer to the manual for reset procedures if necessary.

Support: For further assistance, contact INVT support.