INVT Inverter Goodrive GD35-132G-6-C1 Manual

The INVT Goodrive GD35-132G-6-C1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple protection features, compact design.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
User Interface	Intuitive LCD display for easy operation and monitoring.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
Compact Design	Space-saving design suitable for various installations.
Communication Protocols	Supports Modbus RTU for easy integration with other devices.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely on a stable surface.
Connect input power supply according to specifications.
Connect output to the motor ensuring correct wiring.
Ensure proper grounding for safety.

WARNING! Ensure all connections are secure and follow electrical safety standards.

First-Time Setup

Power on the inverter and follow the setup instructions on the display.

Select the appropriate motor parameters using the menu.
Set the operating frequency and voltage.
Configure protection settings as per application requirements.
Save settings and perform a test run.

CAUTION! Ensure all settings are correct before starting the motor.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Range: 0.75kW to 132kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access settings via the LCD display. Key controls include:

Buttons: Start, Stop, Up, Down, Enter.

Settings: Motor parameters, frequency settings, protection settings.

Connecting Devices

Ensure proper connections for optimal operation.

Turn off power before making connections.
Connect control signals as per wiring diagram.
Verify all connections before powering on.

Tip: Use shielded cables for control signals to minimize interference.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operating mode.
Start the motor using the Start button.
Monitor the operation via the LCD display.
Stop the motor using the Stop button.

WARNING! Do not operate the inverter without proper load.

Maintenance

Regular maintenance is essential for longevity.

Check connections periodically for wear.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.

Regulatory Information

Complies with international safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output voltage	Faulty connections	Verify output wiring and connections.
Overheating	Blocked ventilation	Ensure proper airflow around the inverter.
Erratic operation	Incorrect settings	Review and adjust settings as needed.

Reset: Refer to the user manual for reset instructions.

Service: Contact INVT support for further assistance.