INVT Inverter Goodrive GD35-132G-6-H1 Manual

The INVT Goodrive GD35-132G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and a robust design suitable for demanding environments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, multiple communication protocols, compact design, and user-friendly interface.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Multiple Control Modes	Supports V/F control, vector control, and torque control.
Built-in Protection	Over-voltage, under-voltage, over-current, and thermal protection.
Communication Protocols	Supports Modbus, CANopen, and other industrial protocols.
Compact Design	Space-saving design for easy installation in various environments.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding for safety.
Connect the output to the motor or load.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the appropriate motor parameters.
Set the control mode based on application requirements.
Configure communication settings if applicable.
Save settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380-480V AC.
Output Power: 132 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 50 kg.

Controls and Settings

Access settings via the user-friendly interface on the inverter.

Key Controls: Power, Start/Stop, Parameter settings, and Fault Reset.

Adjust parameters for motor control, communication settings, and protection features.

Connecting Devices

Follow proper procedures for connecting devices to the inverter.

Ensure the inverter is powered off before making connections.
Connect the motor to the output terminals.
Connect any control devices or sensors as needed.
Power on the inverter and check connections.

Tip: Double-check all wiring before powering on the inverter.

Operating the Inverter

Follow these steps to operate the inverter safely and efficiently.

Power on the inverter using the main switch.
Select the desired operating mode.
Start the motor using the Start button.
Monitor the display for any fault indications.

WARNING! Do not operate the inverter without proper training.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring regularly.
Clean the inverter housing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input voltage and connections.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault indication on display	Internal error	Reset the inverter and check for faults.
Motor not running	Incorrect settings	Verify motor parameters and control settings.

Reset: Follow the reset procedure in the user manual if necessary.

Service: For support, contact INVT customer service.