INVT Inverter Goodrive GD35-160G-4-C1 Manual

The INVT Goodrive GD35-160G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and a robust design suitable for demanding environments. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, user-friendly interface, and multiple protection functions. The inverter supports various communication protocols for easy integration into existing systems.

Feature	Description
High Efficiency	Ensures minimal energy loss during operation
Compact Design	Space-saving design for easy installation
User-Friendly Interface	Intuitive controls for easy operation
Multiple Protection Functions	Overvoltage, overcurrent, and thermal protection
Communication Protocols	Supports Modbus, CANopen, and more

Installation

Ensure the inverter is installed in a well-ventilated area. Follow these steps for proper installation:

Mount the inverter securely on a stable surface.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is disconnected from power before installation to avoid electric shock.

First-Time Setup

After installation, follow these steps for first-time setup:

Power on the inverter and wait for the display to initialize.
Select the appropriate operating mode using the control panel.
Configure parameters such as output frequency and voltage.
Save the settings and begin operation.

CAUTION! Ensure all settings are correct before starting the inverter to prevent equipment damage.

Specifications

Model: GD35-160G-4-C1
Input Voltage: 380V AC
Output Power: 160 kW
Control Method: V/F control, vector control
Protection Level: IP20
Operating Temperature: -10°C to 50°C

Controls and Settings

The inverter features a digital display and keypad for easy navigation. Key controls include:

Display: Shows operational status and error messages.

Keypad: Used for parameter setting and mode selection.

Access advanced settings through the menu for fine-tuning performance.

Connecting Devices

Follow these guidelines for connecting devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor to the output terminals.
Connect the control signals as per the wiring diagram.
Power on the inverter and check for proper operation.

Tip: Double-check all connections to prevent short circuits.

Operating Instructions

To operate the inverter:

Select the desired operating mode using the keypad.
Monitor the display for operational status.
Adjust settings as necessary for optimal performance.
Follow safety protocols during operation.

WARNING! Do not exceed the rated specifications to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust buildup.
Check for any signs of overheating or damage.
Follow the manufacturer's recommendations for servicing.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Motor does not run	Incorrect settings	Verify motor connections and settings.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.