INVT Inverter Goodrive GD35-160G-4-D1 Manual

The INVT Goodrive GD35-160G-4-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, built-in protection features, user-friendly interface, multiple communication protocols.

Feature	Description
Advanced Control	High-performance control algorithms for precise motor control.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	Intuitive display for easy parameter setting and monitoring.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the power supply according to the wiring diagram.
Ensure proper grounding to avoid electrical hazards.
Connect the motor and other peripherals as needed.

WARNING! Ensure all power is disconnected before installation to avoid injury.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial setup.

Select the motor type and parameters in the setup menu.
Configure communication settings if applicable.
Adjust protection settings based on application requirements.
Save settings and perform a test run.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Input Voltage: 380V AC.
Output Power: 160kW.
Control Mode: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Weight: 25 kg.

Controls and Settings

Access the settings via the user interface. Key controls include:

Display: Shows operational status and settings.

Buttons: Navigate through menus and adjust parameters.

Common settings include motor parameters, protection settings, and communication options.

Connecting Devices

Ensure proper connections for optimal performance.

Turn off the inverter before connecting devices.
Match cables to the appropriate terminals.
Verify connections before powering on the inverter.

Tip: Use shielded cables for communication to reduce interference.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operating mode.
Start the motor using the control panel.
Monitor performance through the display.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is crucial for longevity:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any abnormal sounds during operation.
Perform software updates as needed.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply issue	Check power connections and supply.
Overheating	Insufficient ventilation	Ensure adequate airflow around the inverter.
Faulty operation	Incorrect settings	Review and adjust settings as needed.
Communication failure	Cable issues	Check communication cables and connections.

Reset: Refer to the manual for reset procedures if necessary.

Support: Contact INVT support for further assistance.