INVT Inverter Goodrive GD35-160G-6-C1 Manual

The INVT Goodrive GD35-160G-6-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

The Goodrive GD35-160G-6-C1 inverter offers a range of features including vector control, built-in braking, and multiple communication protocols. It is suitable for various motor types and applications.

Feature	Description
Vector Control	Provides precise speed and torque control.
Built-in Braking	Allows for quick stopping of the motor.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols.
Compact Design	Space-saving design for easy installation.
Overload Protection	Protects the inverter and motor from damage.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the power supply and motor according to the wiring diagram.
Ensure all connections are secure and insulated.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is powered off before making any connections.

First-Time Setup

Upon powering on the inverter, follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and acceleration/deceleration times.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before operating the inverter.

Specifications

Model: GD35-160G-6-C1
Input Voltage: 380V-480V AC
Output Power: 160 kW
Control Mode: Vector Control
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

The inverter features a user-friendly interface with a digital display for easy navigation.

Control Panel: Start/Stop, Frequency Adjustment, Parameter Settings.

Access advanced settings through the menu for fine-tuning performance.

Connecting Devices

Follow these steps to connect external devices:

Turn off the inverter before making connections.
Connect the motor and any external control devices as per the wiring diagram.
Power on the inverter and verify connections.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Start button to initiate operation.
Adjust the frequency as needed using the control panel.
Monitor the display for any error messages during operation.

WARNING! Do not exceed the rated parameters during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter housing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided with the inverter.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Error code displayed	Faulty connection	Refer to the error code list in the manual.
Motor not running smoothly	Incorrect settings	Verify motor parameters and adjust as necessary.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: For further assistance, contact INVT support.