INVT Inverter Goodrive GD35-160G-6-D1 Manual

The INVT Goodrive GD35-160G-6-D1 is a high-performance inverter designed for various applications, including industrial automation, HVAC systems, and renewable energy. It features advanced control algorithms, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, built-in protection features, user-friendly interface, and versatile application compatibility.

Feature	Description
Advanced Control	Supports vector control and V/F control modes for optimal performance.
Protection Mechanisms	Over-voltage, under-voltage, over-current, and over-temperature protections.
User Interface	Intuitive LCD display for easy monitoring and configuration.
Communication Protocols	Supports Modbus RTU and CANopen for integration with other systems.
Compact Design	Space-saving design suitable for various installation environments.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding of the inverter.
Connect the output to the motor or load as specified.

WARNING! Ensure all power is disconnected before installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the appropriate motor parameters.
Configure the control mode (V/F or vector control).
Set the communication parameters if applicable.
Save settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 3-phase 380V-480V AC.
Output Power: 160 kW.
Control Method: V/F control and vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 25 kg.

Controls and Settings

Access the settings via the LCD display and keypad.

Key Controls: Power, Start, Stop, and Parameter settings.

Adjust parameters for motor control, protection settings, and communication options.

Connecting Devices

Ensure proper connections for optimal performance.

Turn off the inverter and all connected devices before making connections.
Connect the motor leads to the output terminals.
Connect the control signals if applicable.
Power on the inverter and check for proper operation.

Tip: Double-check all connections before powering on the inverter.

Operating the Inverter

Follow these steps to operate the inverter safely.

Ensure all settings are configured correctly.
Press the Start button to initiate operation.
Monitor the display for any error messages.
Press Stop to halt operation safely.

WARNING! Do not operate the inverter without proper settings.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Update firmware as necessary.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Motor not running	Incorrect wiring	Verify motor connections and settings.

Reset: Follow the reset procedure in the manual if necessary.

Service: For support, contact INVT customer service.