INVT Inverter Goodrive GD35-160G-6-H1 Manual

The INVT Goodrive GD35-160G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

The Goodrive GD35-160G-6-H1 inverter offers a variety of features including vector control, built-in PID control, and multiple communication protocols. It is suitable for applications such as pumps, fans, and conveyors.

Feature	Description
Vector Control	Provides precise speed and torque control.
Built-in PID Control	Allows for easy temperature and pressure control.
Multiple Communication Protocols	Supports Modbus, CANopen, and others for easy integration.
Compact Design	Space-saving design for easy installation.
Overload Protection	Protects the inverter from overload conditions.

Installation

Before installation, ensure that the inverter is suitable for your application. Follow these steps for proper installation:

Mount the inverter on a stable surface with adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the motor to the inverter output terminals.
Ensure all connections are secure before powering on.

WARNING! Ensure the inverter is properly grounded to prevent electrical shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure basic settings.

Select the motor type and parameters.
Set the control mode (V/F or vector control).
Adjust the acceleration and deceleration times.
Save the settings and test the motor operation.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 3-phase 380V-480V.
Output Power: 160 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 25 kg.

Controls and Settings

The inverter features a user-friendly control panel with an LCD display for easy navigation. Key controls include:

Control Panel: Start, Stop, and Reset buttons, along with parameter adjustment keys.

Settings can be adjusted through the menu system, allowing for customization based on application needs.

Connecting Devices

Ensure all devices are powered off before making connections. Follow these steps:

Connect the motor leads to the inverter output terminals.
Connect the control signals as per the application requirements.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for control signals to minimize interference.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Start button to initiate operation.
Monitor the display for any fault indications.
Adjust speed and torque settings as necessary during operation.
Press Stop to halt operation safely.

WARNING! Always follow safety protocols when operating machinery.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Inspect connections and wiring periodically.
Clean the inverter housing to prevent dust accumulation.
Check for any signs of overheating or damage.
Perform software updates as recommended by the manufacturer.

Regulatory Information

The Goodrive GD35-160G-6-H1 complies with international safety and performance standards. For detailed regulatory information, refer to the manufacturer's documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Fault indication on display	Incorrect settings	Review and adjust settings as needed.
Motor not running	Connection issue	Check motor connections and parameters.

Reset: Refer to the manual for reset procedures if necessary.

Support: For assistance, contact INVT support at the provided contact information.