INVT Inverter Goodrive GD35-185G-4-C1 Manual

The INVT Goodrive GD35-185G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance
User Interface	Intuitive display for easy operation
Communication Protocols	Supports Modbus, CANopen, and more
Protection Features	Overvoltage, undervoltage, and overcurrent protection
Compact Design	Space-saving and easy to install

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding to prevent electrical hazards.
Connect output to the motor or load as specified.

WARNING! Ensure all connections are secure and follow local electrical codes.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operational mode (e.g., V/F control, vector control).
Adjust parameters for acceleration and deceleration.
Save settings and test the operation.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 380V AC.
Output Power: 185 kW.
Control Method: V/F control and vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 25 kg.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and parameters.

Buttons: Navigate through menus and adjust settings.

Common settings include motor parameters, operational modes, and safety settings.

Connecting Devices

Ensure proper connections to maximize performance.

Turn off power before making connections.
Follow the wiring diagram for input and output connections.
Verify all connections are secure before powering on.

Tip: Use appropriate cables for power and communication.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter.
Select the desired operational mode.
Start the motor using the control panel.
Monitor performance through the display.

WARNING! Do not exceed the rated parameters during operation.

Maintenance

Regular maintenance is essential for longevity.

Check connections and tighten if necessary.
Clean the inverter casing to prevent overheating.
Inspect cooling fans for proper operation.
Update firmware as needed.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power and connections.
Overheating	Blocked ventilation	Ensure proper airflow around the inverter.
No output	Incorrect settings	Verify motor parameters and settings.
Fault code displayed	Internal error	Refer to the manual for fault code definitions.

Reset: Follow the reset procedure in the manual if necessary.

Support: Contact INVT support for further assistance.