INVT Inverter Goodrive GD35-185G-4-S1 Manual

The INVT Goodrive GD35-185G-4-S1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple protection features, and compact design.

Feature	Description
Control Algorithms	Advanced algorithms for precise motor control
User Interface	Intuitive display for easy operation
Protection Features	Overvoltage, undervoltage, and overcurrent protection
Compact Design	Space-saving design for easy installation
Communication Protocols	Supports various communication protocols for integration

Installation

Unpack and inspect the inverter. Mount it securely on a stable surface.

Connect power supply: Ensure correct voltage and phase connections.
Connect motor: Use appropriate cables for motor connection.
Grounding: Ensure proper grounding for safety.
Power on the inverter.

WARNING! Ensure all connections are secure to avoid electrical hazards.

First-Time Setup

Power on the inverter; follow the display prompts for initial configuration.

Set motor parameters: Input motor specifications in the setup menu.
Configure control mode: Select the desired control mode (V/F, vector control).
Adjust protection settings: Set appropriate limits for overcurrent and overvoltage.
Save settings and exit.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380V AC ± 15%.
Output Power: 185 kW.
Control Mode: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 25 kg.

Controls and Settings

Access settings via the user interface. Key controls include START, STOP, and parameter adjustment buttons.

Display: Shows operational status, fault codes, and parameter settings.

Adjust parameters using the navigation keys and confirm with the ENTER button.

Connecting Devices

Ensure the inverter is powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the power supply to the inverter input terminals.
Ensure all connections are tight and secure.

Tip: Use appropriate cable sizes to prevent overheating.

Operating the Inverter

To operate the inverter, ensure all settings are configured correctly.

Press the START button to begin operation.
Monitor the display for operational status and any fault indications.
Use the STOP button to halt operation safely.

WARNING! Do not operate the inverter without proper configuration.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections periodically for signs of wear.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and voltage.
Overcurrent fault	Motor overload	Reduce load or check motor specifications.
Display shows error code	Fault condition	Refer to the manual for error code definitions.
Inconsistent output	Incorrect settings	Verify and adjust parameters as needed.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.