INVT Inverter Goodrive GD35-185G-6-C1 Manual

The INVT Goodrive GD35-185G-6-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and robust protection mechanisms.

Feature	Description
High Efficiency	Ensures minimal energy loss during operation.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports MODBUS, CANopen, and other protocols for easy integration.
Robust Protection	Over-voltage, under-voltage, and over-temperature protection features.
User-Friendly Interface	Intuitive display and controls for easy operation.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are secure before powering on.

WARNING! Ensure the inverter is properly grounded to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operational parameters such as frequency and voltage.
Save the configuration and perform a test run.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Model: GD35-185G-6-C1
Input Voltage: 380V AC
Output Power: 185 kW
Control Method: V/F control, vector control
Protection Level: IP20
Operating Temperature: -10°C to 50°C

Controls and Settings

The inverter features a digital display for monitoring and configuration. Key controls include:

Power Button: Turns the inverter on/off.
Menu Button: Accesses the settings menu.
Up/Down Buttons: Adjusts settings and navigates through menus.
Enter Button: Confirms selections.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor to the output terminals.
Connect the control panel if applicable.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter:

Press the power button to turn on.
Select the desired operational mode.
Monitor the display for operational status.
Adjust settings as necessary during operation.

WARNING! Do not operate the inverter outside of specified parameters.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Update firmware as necessary.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Motor not running	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.