INVT Inverter Goodrive GD35-185G-6-D1 Manual

The INVT Goodrive GD35-185G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, robust protection features, user-friendly interface, and multiple communication protocols.

FeatureDescription
High EfficiencyOptimized for energy savings and reduced operational costs.
Robust ProtectionOver-voltage, under-voltage, over-current, and thermal protection mechanisms.
User-Friendly InterfaceIntuitive display and controls for easy operation.
Multiple Communication ProtocolsSupports Modbus, CANopen, and other protocols for integration.
Compact DesignSpace-saving design suitable for various installations.

Installation

Carefully unpack the inverter and inspect for any damage. Follow the steps below for proper installation.

  1. Mount the inverter on a stable surface, ensuring adequate ventilation.
  2. Connect the input power supply to the designated terminals.
  3. Connect the output terminals to the motor or load.
  4. Ensure all connections are secure and properly insulated.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

  1. Select the motor type and parameters using the control panel.
  2. Set the operational parameters such as frequency and voltage.
  3. Test the inverter with a no-load condition before connecting to the load.

CAUTION! Ensure all settings are correct to prevent damage to the inverter or connected equipment.

Specifications

Controls and Settings

The inverter features a user-friendly control panel with a digital display for monitoring and adjustments.

Control Panel: Start/Stop, Speed Control, Parameter Settings, Fault Display.

Settings include motor parameters, operational limits, and communication settings.

Connecting Devices

Ensure all devices are powered off before making connections.

  1. Connect the input power supply to the inverter.
  2. Connect the output terminals to the motor or load.
  3. Verify all connections are secure and correct.

Tip: Use appropriate cables and connectors to ensure reliable operation.

Operating the Inverter

To operate the inverter, follow these steps:

  1. Power on the inverter using the control panel.
  2. Select the desired operational mode (e.g., manual or automatic).
  3. Start the motor by pressing the start button.
  4. Monitor the operational parameters on the display.

WARNING! Do not exceed the rated parameters to prevent damage.

Maintenance

Regular maintenance is essential for optimal performance.

CAUTION! Always power off the inverter before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the product documentation.

Troubleshooting

SymptomPossible CauseCorrective Action
Inverter does not startPower supply issueCheck input power connections and supply.
OverheatingInsufficient ventilationEnsure proper airflow around the inverter.
Fault code displayedInternal errorRefer to the fault code list in the manual.
Motor not runningIncorrect settingsVerify motor parameters and settings.

Reset: Use the reset function in the control panel if available.

Service: For support, contact INVT customer service.

INVT Inverter Goodrive GD35-185G-6-D1 Manual © - All Rights Reserved 2026