INVT Inverter Goodrive GD35-1R5G-4-C1 Manual

The INVT Goodrive GD35-1R5G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. This manual provides essential information on installation, operation, and troubleshooting to ensure optimal performance of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and customizable settings for various applications.

Feature	Description
High Efficiency	Maximizes energy savings and reduces operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for easy integration.
Customizable Settings	Allows users to tailor performance to specific applications.
Robust Protection	Includes over-voltage, under-voltage, and over-temperature protection.

Installation

Carefully unpack the inverter and inspect for any damage. Follow the steps below for proper installation.

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are secure and power on the inverter.

WARNING! Ensure proper grounding to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure basic settings.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure communication settings if applicable.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before operation.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-400V AC.
Power Range: 0.75kW to 15kW.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Control Method: V/F control, vector control.

Controls and Settings

The inverter features a user-friendly keypad and display for easy operation. Access the main menu to adjust settings and monitor performance.

Keypad Functions: Start, Stop, Forward, Reverse, and Parameter Settings.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the control panel if applicable.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for signal connections to minimize interference.

Operating the Inverter

To operate the inverter, ensure all settings are configured correctly and press the Start button.

Monitor the display for operational status.
Adjust speed and torque settings as needed.
Use the Stop button to halt operation safely.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Inspect connections and wiring for wear or damage.
Clean the inverter casing to prevent dust buildup.
Check cooling fans for proper operation.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the documentation provided.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Inspect output connections and wiring.
Overheating	Insufficient ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	Internal fault	Refer to the error code list in the manual.

Service: For further assistance, contact INVT support.