INVT Inverter Goodrive GD35-1R5G-4-D1 Manual

The INVT Goodrive GD35-1R5G-4-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

The Goodrive GD35-1R5G-4-D1 inverter includes features such as vector control, built-in braking unit, and multiple communication options. It is suitable for various motor types and applications.

Feature	Description
Vector Control	Provides precise speed and torque control for various applications.
Built-in Braking Unit	Allows for quick stopping and energy recovery.
Multiple Communication Options	Supports Modbus, CANopen, and other protocols for easy integration.
Compact Design	Space-saving design suitable for various installations.
Protection Mechanisms	Over-voltage, under-voltage, over-current, and thermal protection.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter in a well-ventilated area.
Connect input power supply and output motor connections securely.
Ensure grounding is properly established.
Check all connections before powering on the inverter.

WARNING! Ensure all electrical connections are secure to prevent hazards.

First-Time Setup

Upon powering on the inverter, follow these steps:

Set the motor parameters using the keypad or software.
Configure the control mode (V/F, vector control) as per application needs.
Test the inverter with a no-load condition before full operation.

CAUTION! Ensure all settings are correct to avoid damage to the motor or inverter.

Specifications

Input Voltage: 380V - 480V AC.
Output Power: 1.5 kW.
Control Method: V/F control, vector control.
Frequency Range: 0-400 Hz.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

The inverter features a user-friendly keypad for easy access to settings and parameters. Key functions include:

Keypad: Start/Stop, Speed Control, Parameter Settings, Fault Reset.

Access advanced settings through the inverter's menu system for detailed configuration.

Connecting Devices

Follow these steps to connect external devices:

Turn off the inverter before making any connections.
Connect the motor to the output terminals.
Connect the control signals as per the application requirements.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram provided in the manual.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Start button to initiate operation.
Use the speed control to adjust motor speed as needed.
Monitor the inverter display for any fault indications.
Press Stop to halt operation safely.

WARNING! Always ensure safety measures are in place during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the documentation provided with the inverter.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
No output to motor	Incorrect wiring	Verify motor connections and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault indication on display	Internal fault	Reset the inverter and check for errors.

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.