INVT Inverter Goodrive GD35-1R5G-4-H1 Manual

The INVT Goodrive GD35-1R5G-4-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a compact design, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple communication protocols, and built-in protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Compact Design	Space-saving design for easy installation.
Multiple Control Modes	Supports V/F control, vector control, and torque control.
Built-in Protection	Over-voltage, under-voltage, over-current, and over-temperature protection.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely in a well-ventilated area.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the motor and other peripherals as needed.

WARNING! Follow all safety guidelines to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the appropriate motor parameters.
Set the control mode based on application requirements.
Configure communication settings if necessary.
Save settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380-480V AC.
Output Power: Up to 5.5 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Dimensions: Compact size for easy integration.

Controls and Settings

Access the inverter settings through the user interface.

Control Panel: Start/Stop, Speed Control, Parameter Settings.

Adjust parameters such as acceleration, deceleration, and motor settings as needed.

Connecting Devices

Ensure proper connections to avoid damage to the inverter and connected devices.

Turn off power before making any connections.
Follow the wiring diagram for correct connections.
Verify all connections before powering on the inverter.

Tip: Use appropriate cables and connectors for reliable performance.

Operating the Inverter

Follow the operational guidelines for safe and efficient use.

Start the inverter using the control panel.
Monitor the display for operational status and alerts.
Adjust speed and other parameters as required during operation.
Stop the inverter safely when not in use.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Perform software updates as recommended by the manufacturer.

Regulatory Information

This inverter complies with relevant safety and performance standards. For detailed regulatory information, refer to the manufacturer's documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply voltage.
No output voltage	Faulty connections	Inspect wiring and connections for integrity.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Erratic operation	Incorrect settings	Review and adjust parameters as needed.

Reset: Refer to the user interface for reset options if available.

Service: Contact INVT support for further assistance.