INVT Inverter Goodrive GD35-200G-4-S1 Manual

The INVT Goodrive GD35-200G-4-S1 is a high-performance inverter designed for various applications, offering advanced control features, high efficiency, and reliability. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, built-in protection features, user-friendly interface, and compact design.

Feature	Description
Advanced Control	Supports various control modes including V/F control and vector control.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protections.
User Interface	Intuitive LCD display for easy monitoring and configuration.
Compact Design	Space-saving design suitable for various installations.
Communication Options	Supports RS485 and CAN communication protocols.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are secure before powering on.

WARNING! Ensure the inverter is properly grounded to prevent electrical shock.

First-Time Setup

Power on the inverter and follow the initial setup instructions displayed on the screen.

Select the appropriate motor parameters in the setup menu.
Configure the control mode based on your application requirements.
Set the desired operating frequency and acceleration/deceleration times.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380V AC ± 15%
Output Voltage: 0-380V AC
Power Range: Up to 200 kW
Control Mode: V/F control, vector control
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

Access the inverter settings through the LCD interface. Key controls include:

Menu Navigation: Use the arrow keys to navigate through the settings.

Parameter Adjustment: Select parameters to adjust values as needed.

Save Settings: Ensure to save changes before exiting the menu.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor leads to the inverter output terminals.
Connect the control signals as per the application requirements.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter, follow these steps:

Press the power button to turn on the inverter.
Select the desired operating mode using the control panel.
Monitor the operating parameters on the LCD display.
Adjust settings as necessary during operation.

WARNING! Do not operate the inverter beyond its rated specifications.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of overheating or damage.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Motor not running	Incorrect wiring	Verify motor connections and settings.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.