INVT Inverter Goodrive GD35-200G-6-C1 Manual

The INVT Goodrive GD35-200G-6-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust hardware, and a user-friendly interface. This manual provides essential information regarding safety, installation, operation, and troubleshooting of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and built-in protection mechanisms.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for easy integration.
Built-in Protection	Over-voltage, under-voltage, and over-temperature protection features.
User-Friendly Interface	Intuitive display and controls for easy operation.

Installation

Carefully unpack the inverter and inspect for any damage. Follow the steps below for proper installation.

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the power supply according to the wiring diagram provided.
Ensure all connections are secure and insulated.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is properly grounded to prevent electrical shock.

First-Time Setup

After installation, follow these steps to configure the inverter for first-time use.

Power on the inverter and access the setup menu.
Select the appropriate motor parameters based on the application.
Set the control mode (V/F control or vector control).
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before operation to avoid damage.

Specifications

Input Voltage: 380V AC ± 15%.
Output Power: 200 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Dimensions: 400mm x 300mm x 200mm.
Weight: 15 kg.

Controls and Settings

The inverter features a digital display and keypad for easy navigation through settings and parameters.

Key Controls: Power, Start/Stop, Up/Down, Enter, and Escape buttons.

Access parameters for motor control, frequency settings, and protection settings through the menu.

Connecting Devices

Follow these guidelines to connect external devices to the inverter.

Ensure the inverter is powered off before making connections.
Connect the motor leads to the inverter output terminals.
Connect any control devices or sensors to the appropriate terminals.
Power on the inverter and test the connections.

Tip: Use shielded cables for signal connections to minimize interference.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Power button to turn on the inverter.
Select the desired operating mode using the keypad.
Start the motor by pressing the Start button.
Monitor the display for any error messages or warnings.

WARNING! Do not operate the inverter without a connected motor.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Inspect connections and wiring for wear or damage.
Clean the inverter casing and ensure ventilation is unobstructed.
Check for software updates and apply as necessary.
Perform functional tests periodically to ensure proper operation.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided with the inverter.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Motor does not start	Incorrect settings	Verify motor parameters and control settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Unusual noise from motor	Mechanical issue	Inspect motor and load for mechanical faults.

Reset: Use the reset function in the menu if available.

Service: For technical support, contact INVT customer service.