INVT Inverter Goodrive GD35-200G-6-D1 Manual

The INVT Goodrive GD35-200G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust design, and a user-friendly interface. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, multiple control modes, built-in protection functions, and a compact design suitable for various applications.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Multiple Control Modes	Supports V/F control, vector control, and more.
Built-in Protection	Over-voltage, under-voltage, over-current protections.
Compact Design	Space-saving design for easy installation.
User-friendly Interface	Intuitive display for easy operation and monitoring.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Unpack and inspect the inverter.
Mount the inverter securely on a stable surface.
Connect input and output power cables as per specifications.
Ensure proper grounding of the inverter.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the appropriate control mode based on application.
Set parameters such as motor type and capacity.
Test the inverter with a connected load.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Range: Up to 200 kW.
Control Mode: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and parameters.

Buttons: Navigate through menus and adjust settings.

Ensure to familiarize yourself with the control panel for efficient operation.

Connecting Devices

Follow these steps to connect devices:

Turn off the inverter and all connected devices.
Connect the motor and power supply according to the wiring diagram.
Double-check all connections before powering on.

Tip: Use appropriate cables and connectors for reliable operation.

Operating the Inverter

To operate the inverter:

Power on the inverter.
Select the desired operation mode.
Start the motor using the control panel.
Monitor performance through the display.

WARNING! Do not exceed the rated capacity of the inverter.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and cables regularly.
Clean the inverter casing to prevent dust accumulation.
Check for any unusual noises or vibrations during operation.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Erratic operation	Incorrect settings	Reset to factory settings and reconfigure.
No output voltage	Faulty connections	Inspect and secure all wiring connections.

Reset: Use the reset function in the menu if necessary.

Service: For support, contact INVT customer service.