INVT Inverter Goodrive GD35-200G-6-H1 Manual

The INVT Goodrive GD35-200G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, multiple protection functions, easy-to-use interface, and compatibility with various motor types.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Multiple Protection	Overvoltage, undervoltage, and overcurrent protections.
User-Friendly Interface	Intuitive controls for easy operation.
Compatibility	Works with various motor types and applications.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is installed by a qualified technician to avoid hazards.

First-Time Setup

Follow these steps to set up your inverter for the first time:

Power on the inverter and access the setup menu.
Configure the motor parameters as per the specifications.
Set the operational modes according to your application needs.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before operation.

Specifications

Model: GD35-200G-6-H1.
Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 200 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.

Controls and Settings

The inverter features a digital display for monitoring and control. Access settings through the keypad or remote interface.

Key Controls: Power, Start/Stop, Speed Control, Parameter Settings.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor to the output terminals.
Connect the control signals as per the wiring diagram.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter, follow these steps:

Ensure all connections are secure.
Power on the inverter using the main switch.
Select the desired operational mode using the keypad.
Monitor the display for operational status and parameters.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections and tighten as necessary.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Schedule periodic professional inspections.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Inspect output connections and load.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	System fault	Refer to the error code guide for troubleshooting steps.

Reset: Follow the reset procedure in the settings menu if necessary.

Service: For support, contact INVT customer service.