INVT Inverter Goodrive GD35-220G-4-C1 Manual

The INVT Goodrive GD35-220G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple protection functions, and user-friendly interface.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Protection Functions	Over-voltage, under-voltage, over-current, and thermal protection.
User-Friendly Interface	Intuitive controls and display for easy operation.

Installation

Carefully unpack the inverter and inspect for any damage. Install the inverter in a well-ventilated area.

Mount the inverter securely on a flat surface.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure proper grounding and follow all safety precautions during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the appropriate operating mode.
Set the output voltage and frequency as required.
Configure any additional parameters based on application needs.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 220V AC.
Output Power: 35kW.
Control Method: V/f control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

The inverter features a digital display and keypad for easy navigation and configuration.

Key Controls: Power, Mode Selection, Parameter Adjustment, and Reset.

Connecting Devices

Connect the inverter to the motor and other devices as per the wiring diagram provided.

Ensure the inverter is powered off before making connections.
Use appropriate cables for connections to ensure safety and performance.
Verify all connections before powering on the inverter.

Tip: Double-check polarity and connections to avoid damage.

Operating the Inverter

Follow the operating instructions for optimal performance.

Power on the inverter and select the desired mode.
Monitor the display for operational status and alerts.
Adjust settings as necessary during operation.

WARNING! Do not operate the inverter outside specified limits.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Output voltage unstable	Load issues	Check load connections and settings.

Reset: Use the reset function in the menu if available.

Service: Contact support for further assistance.