INVT Inverter Goodrive GD35-220G-6-H1 Manual

The INVT Goodrive GD35-220G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high reliability, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and comprehensive protection functions.

Feature	Description
High Efficiency	Reduces energy consumption and operating costs.
Compact Design	Space-saving installation with a lightweight structure.
Multiple Communication Protocols	Supports MODBUS, CANopen, and other protocols for easy integration.
Comprehensive Protection	Over-voltage, under-voltage, over-current, and thermal protection.
User-Friendly Interface	Intuitive display and control for easy operation.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Unpack the inverter and inspect for damage.
Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the power supply according to the wiring diagram.
Connect the motor and control signals as required.

WARNING! Ensure all power is disconnected before installation to avoid electric shock.

First-Time Setup

Power on the inverter and configure the basic settings:

Select the motor type and parameters in the setup menu.
Set the control mode (V/F, vector control, etc.).
Adjust the acceleration and deceleration times.
Save the settings and perform a test run.

CAUTION! Double-check all connections before powering on.

Specifications

Input Voltage: 220V AC.
Output Power: 35 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 15 kg.

Controls and Settings

Access settings through the control panel:

Display: Shows operational status and parameters.

Buttons: Start, stop, and navigate through the menu options.

Adjust settings for motor control, protection, and communication.

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the motor leads to the inverter output terminals.
Connect control signals from the PLC or control panel.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for signal connections to minimize interference.

Operating the Inverter

To operate the inverter:

Press the start button to initiate operation.
Monitor the display for any fault indications.
Adjust speed and torque settings as needed.
Stop the inverter using the stop button when finished.

WARNING! Do not operate the inverter beyond its rated capacity.

Maintenance

Regular maintenance is essential for longevity:

Inspect connections and wiring for wear.
Clean the inverter housing to prevent dust accumulation.
Check cooling fans and ensure they are operational.
Perform software updates as recommended by the manufacturer.

Regulatory Information

This inverter complies with relevant safety and performance standards. For detailed regulatory information, refer to the manufacturer's documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Fault indication on display	Incorrect settings	Refer to the manual for fault codes and corrective actions.
Motor not running	Connection issue	Check motor connections and settings.

Reset: Use the reset function in the menu if necessary.

Service: Contact INVT support for further assistance.