INVT Inverter Goodrive GD35-250G-6-H1 Manual

The INVT Goodrive GD35-250G-6-H1 is a high-performance inverter designed for various applications, providing reliable and efficient control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, user-friendly interface, multiple protection features, compact design, and energy-efficient operation.

Feature	Description
Advanced Control Algorithms	Ensures precise motor control and efficiency.
User-Friendly Interface	Easy to navigate and configure settings.
Multiple Protection Features	Over-voltage, under-voltage, and over-temperature protection.
Compact Design	Space-saving design for easy installation.
Energy Efficiency	Reduces energy consumption during operation.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor ensuring correct polarity.
Power on the inverter and check for proper operation.

WARNING! Ensure all connections are secure to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Adjust the frequency and voltage settings as required.
Save the configuration and exit the setup menu.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Model: GD35-250G-6-H1.
Input Voltage: 380V AC.
Output Power: 250 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access the control panel for configuration and monitoring. Key controls include:

Power Button: Turns the inverter on/off.
Display Screen: Shows operational status and settings.
Navigation Buttons: Used to navigate through the menu.
Parameter Setting: Allows adjustment of motor parameters.

Connecting Devices

Follow these steps to connect devices:

Ensure the inverter is powered off before making connections.
Connect the motor to the output terminals.
Connect the power supply to the input terminals.
Double-check all connections before powering on.

Tip: Use appropriate cables to ensure safe and efficient operation.

Operating the Inverter

To operate the inverter:

Press the power button to turn on the inverter.
Select the desired operating mode from the menu.
Start the motor by pressing the start button.
Monitor the operational parameters on the display screen.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and cables regularly for wear.
Clean the inverter housing to prevent dust accumulation.
Check for any abnormal sounds during operation.

Regulatory Information

This inverter complies with international safety standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections.
No output to motor	Incorrect wiring	Verify motor connections.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	Fault condition	Refer to the manual for error code meanings.

Reset: Follow the reset procedure in the menu if necessary.

Service: For support, contact INVT customer service.