INVT Inverter Goodrive GD35-280G-4-C1 Manual

The INVT Goodrive GD35-280G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high reliability, and a user-friendly interface. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and robust protection mechanisms.

Feature	Description
High Efficiency	Minimizes energy loss during operation
Compact Design	Space-saving installation
Multiple Communication Protocols	Supports Modbus, CANopen, and more
Robust Protection	Over-voltage, under-voltage, and over-current protection
User-Friendly Interface	Intuitive display for easy operation

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding to prevent electrical hazards.
Connect the output to the motor or load.

WARNING! Ensure all connections are secure to avoid malfunction.

First-Time Setup

Power on the inverter and follow the setup instructions on the display.

Select the appropriate motor type in the settings menu.
Set the operational parameters such as frequency and voltage.
Save the settings and perform a test run.

CAUTION! Ensure all safety precautions are followed during setup.

Specifications

Model: GD35-280G-4-C1
Input Voltage: 380V AC
Output Power: 280 kW
Control Method: V/F control, vector control
Protection Level: IP20
Operating Temperature: -10°C to 50°C

Controls and Settings

Access the inverter settings via the front panel display. Key controls include:

Power Button
Menu Navigation Keys
Parameter Adjustment Knob
Emergency Stop Button

Connecting Devices

Ensure proper connections to external devices for optimal performance.

Turn off the inverter before making connections.
Connect the motor leads to the output terminals.
Connect control signals as per the wiring diagram.

Tip: Double-check all connections before powering on.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operational mode.
Start the motor using the start command.
Monitor the display for operational status.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for longevity:

Check connections periodically.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
No output to motor	Incorrect wiring	Verify motor connections and settings.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Error codes displayed	Fault condition	Refer to the error code section in the manual.

Reset: Use the reset function in the menu if necessary.

Service: For support, contact INVT customer service.