INVT Inverter Goodrive GD35-280G-4-H1 Manual

The INVT Goodrive GD35-280G-4-H1 is a high-performance inverter designed for various applications, providing reliable power conversion and control. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple protection functions, and user-friendly interface.

Feature	Description
High Efficiency	Maximizes energy conversion with minimal losses.
Compact Design	Space-saving design suitable for various installations.
Multiple Protection	Over-voltage, under-voltage, over-current protections.
User-Friendly Interface	Easy-to-navigate controls and display.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
Mount the inverter securely: Use appropriate mounting hardware.
Connect input and output terminals: Follow wiring diagrams provided.
Power up the inverter: Ensure all connections are secure before powering on.

WARNING! Ensure proper grounding to prevent electrical hazards.

First-Time Setup

After installation, follow these steps for initial setup:

Power on the inverter and wait for the display to initialize.
Set parameters: Use the menu to configure voltage, frequency, and other settings.
Test operation: Connect a load and verify functionality.

CAUTION! Ensure all settings are correct before connecting to the main power supply.

Specifications

Model: GD35-280G-4-H1
Input Voltage: 380V AC
Output Voltage: 0-400V AC
Power Rating: 280kW
Efficiency: Up to 98%
Operating Temperature: -10°C to 50°C

Controls and Settings

The inverter features a digital display and buttons for easy navigation through settings:

Display: Shows operational status, error codes, and settings.

Buttons: Navigate through menus, adjust settings, and reset errors.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the input source to the inverter's input terminals.
Connect the output terminals to the load.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter, follow these guidelines:

Monitor the display for operational status and alerts.
Adjust settings as necessary for optimal performance.
Perform regular checks to ensure all connections are secure.

WARNING! Do not operate the inverter outside specified limits.

Maintenance

Regular maintenance is essential for longevity:

Inspect connections and wiring regularly.
Clean the inverter casing to prevent dust buildup.
Check for any signs of wear or damage.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter not powering on	Power supply issue	Check power connections and circuit breaker.
Error code displayed	Fault condition	Refer to the manual for error code definitions.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Output voltage unstable	Load issues	Check load connections and specifications.

Reset: Follow the reset procedure in the manual if necessary.

Service: For support, contact INVT customer service.