INVT Inverter Goodrive GD35-280G-6-C1 Manual

The INVT Goodrive GD35-280G-6-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, user-friendly interface, multiple communication protocols, and robust protection features.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
Communication Protocols	Supports Modbus, CANopen, and other protocols.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	Easy-to-read LCD display with intuitive navigation.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the power supply according to the wiring diagram.
Ensure proper grounding to prevent electrical hazards.
Connect the motor and control signals as required.

WARNING! Ensure all connections are secure and follow local electrical codes.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure communication settings if applicable.
Save the settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 380V-480V AC.
Output Power: Up to 280kW.
Control Method: V/F, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Dimensions: Compact design for easy installation.

Controls and Settings

Access the settings via the LCD display. Key controls include:

Buttons: Start, Stop, Up, Down, Enter.

Settings: Motor parameters, frequency settings, and communication options.

Connecting Devices

Follow these steps to connect external devices:

Turn off the inverter and all connected devices.
Connect the motor and control signals as per the wiring diagram.
Ensure all connections are secure and insulated.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter:

Press the Start button to initiate operation.
Monitor the display for operational status and parameters.
Adjust settings as necessary during operation.
Press Stop to halt operation safely.

WARNING! Do not operate the inverter without proper setup and safety measures.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the manufacturer's documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output voltage	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Communication failure	Wiring issue	Check communication wiring and settings.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.