INVT Inverter Goodrive GD35-280G-6-D1 Manual

The INVT Goodrive GD35-280G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, multiple protection features, user-friendly interface, and compact design.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Robust Protection	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	Intuitive display for easy monitoring and adjustments.
Compact Design	Space-saving design suitable for various installations.
Multiple Control Modes	Supports V/F control, vector control, and torque control.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Attach the output terminals to the motor or load.
Ensure proper grounding of the inverter.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure protection settings as per application requirements.
Save the settings and perform a test run.

CAUTION! Ensure all safety measures are in place before operating.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Range: Up to 280kW.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the control panel for settings adjustments and monitoring.

Display: LCD screen for real-time data.

Buttons: Start, Stop, Up, Down, and Menu for navigation.

Settings include frequency, acceleration, deceleration, and protection parameters.

Connecting Devices

Ensure proper connections to external devices for optimal performance.

Turn off the inverter and all connected devices before making connections.
Follow the wiring diagram for correct terminal connections.
Verify all connections before powering on the inverter.

Tip: Use appropriate cables and connectors to prevent signal loss.

Operating the Inverter

Follow the steps below to operate the inverter safely.

Press the Start button to power on the inverter.
Monitor the display for operational status and parameters.
Adjust settings as necessary during operation.
Press Stop to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure cooling vents are unobstructed.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output voltage	Incorrect settings	Verify output settings and parameters.
Overheating	Blocked ventilation	Ensure cooling vents are clear.
Faulty display	Electrical issue	Reset the inverter and check connections.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.