INVT Inverter Goodrive GD35-280G-6-H1 Manual

The INVT Goodrive GD35-280G-6-H1 is a high-performance inverter designed for various industrial applications. It offers advanced control algorithms, high efficiency, and a wide range of features to ensure optimal performance and reliability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, high efficiency, compact design, multiple protection features, user-friendly interface.

Feature	Description
High Efficiency	Ensures minimal energy loss during operation
Compact Design	Space-saving design suitable for various installations
Multiple Protection Features	Overvoltage, undervoltage, overcurrent, and thermal protection
User-Friendly Interface	Easy-to-navigate control panel for quick adjustments
Communication Protocols	Supports Modbus, CANopen for integration with other systems

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are secure and insulated.

WARNING! Ensure power is off during installation to avoid electrical shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the operational limits for voltage and current.
Configure communication settings if applicable.
Save the settings and perform a test run.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380V AC ± 15%
Output Voltage: 0-380V AC
Power Range: 0.75kW to 280kW
Control Method: V/F control, vector control
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

Access settings via the control panel. Key controls include:

Panel: Power, Start/Stop, Speed Control, Fault Reset.

Settings: Motor parameters, operational limits, communication settings.

Connecting Devices

Ensure proper connections to avoid damage.

Turn off the inverter and connected devices before making connections.
Follow the wiring diagram for correct connections.
Check all connections for tightness and insulation.

Tip: Use appropriate gauge wire for connections to prevent overheating.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter using the control panel.
Select the desired operational mode.
Start the motor using the Start button.
Monitor the display for any fault indications.

WARNING! Do not operate the inverter beyond its rated specifications.

Maintenance

Regular maintenance is essential for longevity.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust buildup.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Inspect output connections and wiring.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault indication on display	Internal fault	Reset the inverter and check for errors.

Reset: Follow the reset procedure in the settings menu if available.

Service: Contact INVT support for further assistance.